Kit Item
The Kit Item file contains the valid kit or parent items for a make-to-order or finished good kit.
REFERENCED BY
| IC10.2 | IC11.1 | IC12.1 | IC260 | IC262 | IC60.1 |
| IC60.2 | IC60.3 | IC62.1 | IC62.2 | IC62.4 |
| FIELD NAME | DESCRIPTION/VALID VALUES | UPDATED BY | ||||||
|---|---|---|---|---|---|---|---|---|
| KIT-ITEM-GROUP Element: Item Group | Alpha 5 This field contains the identifier for a group of items that can be shared by one or more companies. |
|
||||||
| KIT-COMPANY Element: Company | Numeric 4 Identifies the AP company if the resource type = V. Identifies the HR company if the resource type = E. It is blank for type A, P or Q resources. |
|
||||||
| KIT-LOCATION Element: Location | Alpha 5 This field contains a valid stocking location within the company inventory. |
|
||||||
| KIT-ITEM Element: Item | Alpha 32 This field contains the item identifier. |
|
||||||
| KIT-ORDER-SIZE Element: Order Size | Numeric 8 This field contains the standard order size for the kit. The component quantity specifies the number of required kit components needed for each kit. This field is for reference purposes only. |
|
||||||
| KIT-NOTES Element: Notes | Alpha 20 (Lower Case) This field contains notes about the kit. This information is for reference purposes only. |
|
||||||
| KIT-PROCEDURE-CD Element: Procedure Cd | Alpha 7 (Lower Case) This field contains the procedure code for the kit. This information is for reference purposes only. |
|
||||||
| KIT-MAKE-CD Element: Make Cd | Alpha 1 This field contains the code that specifies whether a kit is a make-to-order or a finished good kit. O = Make to Order S = Make to Stock |
|
||||||
| KIT-ACTIVE-STATUS Element: Active Status | Alpha 1 This field contains the status to control the use of the kit. A = Active I = Inactive |
|
||||||
| KIT-SEQ Element: Seq | Numeric 3 This field contains the last sequence number of the last component line. This field is used when adding new component lines. |
|
||||||
| KIT-INST-LINE Element: Inst Line | Numeric 3 This field contains the number of the last instruction line. This field is used when adding new instruction lines. |
|
||||||
| KIT-CTG-PROD-FLAG Element: All Flag | Alpha 1 This field contains the contiguous production flag, used if production spans multiple days. Set its value to Yes if production must occur on consecutive days - there cannot be any non-work days between the start and end production dates. Y = Yes N = No |
|
||||||
| KIT-COST-TOL-PCT Element: Cost Tol Pct | Percent 5.3 (Percent) This field contains the cost tolerance percent for a finished good. |
|
||||||
| KIT-ZERO-COST-FL Element: All Flag | Alpha 1 The zero cost tolerance flag is used to indicate if zero tolerance is allowed for finished good cost tolerance checking. If no tolerance checking is needed, this field's value is No. Y = Yes N = No |
|
||||||
| KIT-QTY-TOL-PCT Element: Qty Tol Pct | Percent 5.3 (Percent) This is the quantity tolerance percent for a finished good. |
|
||||||
| KIT-ZERO-QTY-FL Element: All Flag | Alpha 1 The zero quantity tolerance flag is used to indicate if zero tolerance is allowed for finished good quantity tolerance checking. If no tolerance checking is desired, this field's value is No. Y = Yes N = No |
|
||||||
| KIT-LAST-BRDN-SEQ Element: Seq | Numeric 3 This field contains the last burden sequence. |
|
||||||
| KIT-LAST-BYPRO-SEQ Element: Seq | Numeric 3 This field contains the last byproduct sequence. |
|
||||||
| KIT-CAPACITY Element: Capacity | Numeric 8 Capacity describes the maximum quantity of a finished good that can be produced for a work order. |
|
||||||
| KIT-FGV-ACCT-UNIT Element: Acct Unit | Alpha 15 The finished good variance accounting unit is used to post variances in finished good cost when there is a difference between the cost from an original work order and the cost returned from inventory for a reversed work order. |
|
||||||
| KIT-FGV-ACCOUNT Element: Account | Numeric 6 The finished good variance account is used to post variances in finished good cost when there is a difference between the cost from an original work order and the cost returned from inventory for a reversed work order. |
|
||||||
| KIT-FGV-SUB-ACCT Element: Sub Acct | Numeric 4 The finished good variance subaccount is used to post variances in finished good cost when there is a difference between the cost from an original work order and the cost returned from inventory for a reversed work order. |
|
||||||
| KIT-SCHED-INCR Element: Sched Incr | Numeric 2 Schedule increment is used with schedule frequency to indicate the length of a scheduling period for work orders. The increment is the number of days, weeks or months in a period. |
|
||||||
| KIT-SCHED-FREQ Element: Sched Freq | Alpha 1 Schedule frequency is used with schedule increment to indicate the length of a scheduling period for work orders. The frequency defines whether the period is in days, weeks or months. D = Daily W = Weekly M = Monthly |
|
||||||
| KIT-PC-ACCT-UNIT Element: Pc Acct Unit | Alpha 15 |
|
||||||
| KIT-PC-ACCOUNT Element: Pc Account | Numeric 6 |
|
||||||
| KIT-PC-SUB-ACCT Element: Pc Sub Acct | Numeric 4 |
|
||||||
| KIT-BA-ACCT-UNIT Element: Ba Acct Unit | Alpha 15 |
|
||||||
| KIT-BA-ACCOUNT Element: Ba Account | Numeric 6 |
|
||||||
| KIT-BA-SUB-ACCT Element: Ba Sub Acct | Numeric 4 |
|
||||||
| KIT-ITEM-CODE-USED Element: Item Code Used | Derived |
|
| NAME | KEY FIELDS | DESCRIPTION / SUBSET CONDITION | USED IN | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KITSET1 |
ITEM-GROUP COMPANY LOCATION ITEM |
|
|||||||||||||||
| KITSET2 |
MAKE-CD ITEM-GROUP COMPANY LOCATION ITEM |
|
| ||||||||||||||
| RELATION NAME |
RELATED FILE | INTEGRITY RULES / FIELD MATCH | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iccompany | ICCOMPANY |
Required
| ||||||||||||
| Iclocation | ICLOCATION |
Required
| ||||||||||||
| Itemgroup | ITEMGROUP |
Required
| ||||||||||||
| Itemmast | ITEMMAST |
Required
|
| RELATION NAME |
RELATED FILE | INTEGRITY RULES / FIELD MATCH | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Component | COMPONENT |
Delete Cascades
| ||||||||||||||||||
| Fgburden | ICFGBRDN |
| ||||||||||||||||||
| Fgbyprod | ICFGBYPROD |
Delete Restricted
| ||||||||||||||||||
| Ktinstruct | KTINSTRUCT |
Delete Cascades
| ||||||||||||||||||
| Worder | WORDER |
|
All trademarks and registered trademarks are the property of their
respective owners.